PCAP Touch Guide Motherboard for Information Point, WF-G3602, AndroidSBC, Zurich

TL;DR: PCAP Touch Guide Motherboard for Information Point

AndroidSBC sourcing desk: smart guide kiosk board pricing held flat through the current quarter serving Zurich, Switzerland. The WF-G3602 smart guide kiosk Android motherboard spans the wayfinding information kiosk and eleven sister models in the WF-G series, all built on the RK3568 quad-core ARM Cortex-A55 2.0GHz 64-bit SoC with the ARM Mali-G52 2EE GPU, HDMI 2.0 4K 60fps plus eDP, and Android 12 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-G family from the Longgang source factory in Shenzhen to Zurich and Switzerland importers who run mall directory, wayfinding, information point, dual-screen promotion, interactive display and outdoor smart city programmes.

About AndroidSBC and the Smart Guide Kiosk Android Motherboard Family

AndroidSBC is the export brand of Wanlin Manufacturing Group, a Shenzhen source-factory group with more than a decade of OEM and ODM work on Rockchip and Allwinner platforms. The smart guide kiosk Android motherboard family covered here is the WF-G line: twelve models across eight silicon options, from the Rockchip RK3588 8nm octa-core tier with the Mali-G610 MP4 GPU and 6 TOPS NPU, through the RK3568 and RK3566 22nm mid tier, the RK3288 and RK3399 28nm legacy tier, and the Allwinner A133, H618 and T527 entry and industrial tiers. The family is aimed at the screens that answer a visitor question: mall floor directories, tenant and product finders, transit and hospital wayfinding, hotel lobby guides, museum exhibit points and outdoor smart city information pillars. That is the workload Zurich and Switzerland integrators are quoting for, and the WF-G board is the part that decides whether the answer arrives in a second. OEM private label starts at 100 pieces, ODM carrier board work at 500 pieces, and both tracks keep the same seven-year firmware window that applies to the standard Zurich and Switzerland catalogue SKUs.

WF-G3602 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-G3602 (wayfinding information kiosk) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Switzerland importers sourcing the WF-G family, the WF-G3602-A variant is the typical configuration for the public venue wayfinding and route planning use case, with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing Smart Guide Kiosk Android Motherboards for Switzerland Buyers

The seventh obstacle is dual-screen behaviour. Directory and promotion terminals need two independent video paths, and Zurich integrators often discover at the site that a board advertised as dual-screen only mirrors the same content to both panels.

Lifecycle is planned at the point of sale. AndroidSBC keeps a seven-year firmware window on the WF-G family, publishes a migration path from the 28nm legacy tiers and the A133 entry tier, and holds buffer stock so Zurich and Switzerland programmes are not stranded when a platform ages out. OFCOM CH conformity and the CE marking with the OFCOM radio interface notification file set stay versioned alongside. As of September 18, 2026 the Zurich programme stands at 41400 boards booked, the 7th lot to clear the line for Switzerland and the 7th to route through the Hamburg - Zurich rail lane.

Competitive Comparison: WF-G3602 vs Competing Smart Guide Kiosk Android Boards

The competitive set for a smart guide kiosk board is wide, from single-chip vendor boards to full industrial computer modules. What separates them for Zurich buyers in Switzerland is whether the vendor can cover an entry price-check screen and a multi-screen AI advisory wall from one firmware baseline.

• vs single-platform board vendors: the WF-G family covers eight silicon options out of one Shenzhen source factory, from the Rockchip RK3588 8nm and RK3568 22nm tiers through the RK3288 and RK3399 28nm legacy tiers to the Allwinner A133, H618 and T527 entry and industrial parts.
• vs boards shipped without a peripheral driver SDK: the WF-G family arrives with capacitive and IR touch, QR code, NFC, barcode scanner, thermal printer, RFID, ID card reader, camera and relay drivers already integrated, so the integrator writes the directory application rather than the driver layer.
• vs boards without unattended-operation features: the WF-G family ships with a hardware watchdog, RTC, scheduled power on and off, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback out of the box.
• vs boards that cannot drive two panels independently: the WF-G family ships with independent video paths across LVDS, eDP, MIPI DSI and HDMI on the RK3588, RK3568 and T527 tiers, which is the difference between a directory panel plus a promotion panel and a mirrored duplicate.

Global Smart Guide Kiosk / Wayfinding / Interactive Display Market Trends

Venue operators are consolidating screen estates onto fewer board platforms: wayfinding information kiosk programmes in Switzerland used to be quoted per site with a different controller each time; Mordor Intelligence and Technavio both track the same consolidation direction in self-service hardware. For Zurich buyers the consequence is that a single wayfinding information kiosk platform has to serve a floor directory, a promotional wall and an information point, provided the board supports independent dual display output.

• Mall floor directories and tenant finders: WF-G3602 is the usual starting point for shopping centre rollouts, with the dual-screen WF-G1331 as the directory plus promotion option.
• Transit, hospital and campus wayfinding banks: the mid-tier WF-G1331 and the industrial WF-G6180 sister SKUs form the public venue ladder, with route planning and multi-language content.
• Promotional walls and in-venue signage networks: WF-G6180 and the entry-tier sister SKUs cover continuous-play directory and campaign screens across a venue estate.

For Zurich buyers the takeaway is narrow: specify the Switzerland compliance set and the content client at the same time as the silicon, or the estate gets re-qualified later.

Partner Success Story: Andes Centro Digital (shopping centre technology integrator)

A recent Andes Centro Digital deployment in the Latin America commercial property segment shows how the WF-G smart guide kiosk Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand, supports Zurich integrators. Andes Centro Digital refreshed 41400 WF-G entry-tier boards across shopping centre directory and promotional screens.

• OEM relationship: AndroidSBC private-label SKU shipped with Andes Centro Digital branding and CE / FCC / RoHS files bundled.
• Silicon lock: Rockchip RK3588 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
• Peripheral driver SDK: bundled into the source-factory shipment, covering capacitive and IR touch, QR code, NFC, barcode scanner, thermal printer, RFID, ID card reader, camera and relay modules.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus OFCOM CH conformity, all bundled into the Shenzhen source-factory shipment.

According to Andes Centro Digital Technology Manager for Latin America Commercial Property: Andes Centro Digital kept a mall estate on one 22nm entry tier and moved 41400 directory screens to the WF-G board, which let Zurich centres in Switzerland keep the same Android image as the previous generation.

Field Report: wayfinding kiosk bank installation at a transit interchange

LONGGANG, Shenzhen, September 18, 2026 - Chu Lin, AndroidSBC field desk. Cartons were drop-tested and the WF-G3602 boards re-verified afterwards, with the wayfinding information kiosk image and the certification label checked against the shipment manifest for Switzerland. The WF-G3602 smart guide kiosk Android motherboard order for Zurich, Switzerland cleared the burn-in station on schedule and is en route via the Hamburg - Zurich rail lane.

The WF-G3602 wayfinding information kiosk production lot includes the WF-G3602-A variant as the typical configuration, with payment-peripheral driver SDK and OTA content management bundled into the source-factory shipment. For Switzerland integrators, the OFCOM CH conformity plus CE marking with the OFCOM radio interface notification paperwork is bundled.

Filed by Chu Lin, AndroidSBC field desk, LONGGANG, Shenzhen. Switzerland integrators typically request CE plus local radio interface notification for smart guide kiosk board deployments.

WF-G3602 Application Scenarios

The WF-G3602 wayfinding information kiosk sits inside a twelve-variant WF-G smart guide kiosk Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-G3602-A configuration is the typical build for the public venue wayfinding and route planning use case, with payment-peripheral driver SDK and OTA content management bundled.

• Shopping centre floor directories and tenant finders: WF-G3602 plus WF-G5270 form the mall-side directory ladder, with independent dual display output and 4K HDMI.
• Compact countertop enquiry and price check terminals: WF-G8800 plus WF-G3602 are the usual pairing where housing depth is limited and the BOM target is fixed.
• Transit, hospital and campus wayfinding banks: WF-G8801 is the dedicated public venue SKU, with route planning, multi-language content and a -20C to 70C window.
• AI product advisory walls and virtual try-on mirrors: WF-G3600 plus WF-G5270 cover the vision and recommendation workload on the device.
• Promotional walls and in-venue signage networks: WF-G8800 plus WF-G3600 ship for continuous-play directory and campaign screens tied to a content calendar.
• Hotel, resort and casino lobby directories: WF-G5270 plus WF-G8801 carry the guest orientation flow in Zurich.
• Exhibition and museum interpretive display points: WF-G3602 is the compact SKU for exhibit-side content and catalogue browsing.
• Outdoor smart city information pillars: WF-G3600 is positioned for street-level and park cabinets where the temperature range has to hold.
• Venue programmes running in Zurich: mall directories, supermarket price check, pharmacy enquiry, transit wayfinding, hospital orientation, hotel lobby guides, museum exhibits, campus directories and outdoor information pillars.

Partnership Models for Zurich Buyers

For Switzerland buyers the WF-G family can be taken as a private-label product, as a custom design or as a stock catalogue item, and Zurich partners usually start on one track and ladder up.

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom Android ROM, custom SKU label and CE / FCC / RoHS files bundled.
• ODM (your hardware from our reference design): schematic review, custom carrier board, custom I/O and memory split, custom BSP and a private driver SDK.
• Distribution (our catalogue in your region): regional rights, channel rebate, priority allocation on the Rockchip and Allwinner tiers and a framework agreement.

AndroidSBC supports partners moving between tracks mid-programme in Zurich, which is common when a distributor wins a tender that turns into a private-label line for Switzerland.

Frequently Asked Questions

Does the WF-G smart guide kiosk Android motherboard family support a wayfinding information kiosk?

Answer: Yes. The wayfinding information kiosk is stock on the WF-G smart guide kiosk Android motherboard family from AndroidSBC. All tiers are validated against the same firmware build and the same content management interface before shipment to Zurich.

What is the real difference between the RK3568 tier and the other silicon tiers in the WF-G family?

Answer: RK3568 is one rung on an eight-step ladder. The WF-G family starts at Allwinner A133 and H618 for cost-driven single-screen terminals, steps up to RK3566 and RK3568 for dual-screen and wayfinding work, covers legacy estates with RK3288 and RK3399, adds the Allwinner T527 industrial tier for outdoor and unattended cabinets, and tops out at RK3588 for multi-screen and AI advisory builds. AndroidSBC keeps all eight on one Android baseline.

Can AndroidSBC handle CE / FCC / UKCA / RoHS / REACH paperwork for Switzerland?

Answer: Yes. AndroidSBC, a Wanlin Manufacturing Group export brand, handles the conformity paperwork as part of the source-factory shipment: CE, FCC, UKCA, RoHS, REACH and the OFCOM CH registration with CE marking with the OFCOM radio interface notification that Switzerland customs asks for.

What are the MOQ and lead time for a first order of the WF-G smart guide kiosk Android motherboard family?

Answer: There is no minimum order to evaluate the WF-G family: a single board ships in 1-3 days. Scaling up, Zurich partners move to the OEM track at 100 pieces or the ODM track at 500 pieces, with a 15-30 day production window.

Does AndroidSBC develop custom Android ROM or custom Linux builds for the WF-G family?

Answer: Yes. The ODM track covers AOSP and Linux BSP porting, custom boot animation, custom launcher, pre-installed content clients and driver work. Zurich integrators get a versioned build they can pin rather than a vendor image that changes without notice.

How are software updates and long-term support handled on the WF-G family?

Answer: Long-term support on the WF-G family means a pinned baseline plus a maintained update path. Switzerland operators can stay on their validated build for years and still receive security patches, because AndroidSBC keeps the branch alive rather than forcing a platform migration.

Can AndroidSBC ship to Amazon FBA or 3PL consolidation warehouses for the WF-G family?

Answer: Yes. AndroidSBC supports FOB Shenzhen, CIF Port of Hamburg and DDP delivery into Amazon FBA or a consolidation warehouse, with serialised carton labels and the OFCOM CH dossier bundled for Switzerland.

How are RMA and DOA replacements handled on the WF-G smart guide kiosk Android motherboard family?

Answer: The RMA path is direct. Switzerland partners lodge the unit with the export desk, replacement boards come from Shenzhen buffer stock for DOA cases, and repaired or replaced units are returned on the agreed lane to Zurich.

Contact AndroidSBC: Start Your WF-G3602 Sourcing Conversation

For the WF-G smart guide kiosk Android motherboard family, AndroidSBC, a Wanlin Manufacturing Group export brand, opens the following channels to Zurich integrators:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

A 1-3 day sample lead applies to Switzerland buyers and a 15-30 day mass-production lead to bulk orders. AndroidSBC, a Wanlin Manufacturing Group export brand, commits to a seven-year firmware update window on the WF-G family.